Kemper Profiling Amp Rack

Save $700

$2,899 $3,599
Sold out - Contact us to backorder


Kemper Profiler Rack at a Glance:
200 factory presets, and extensive online resources
Profile your own amplifiers
The perfect link between stage and studio

200 factory presets, and extensive online resources
Right out of the box, the Kemper Profiler Rack has a ton of profiled amps ready to play. Just connect the Profiler Rack to your sound system or recording rig, and you’re set. And even if you don’t have a collection of amps to profile, there are hundreds of profiled amplifiers available online, and the community of Kemper profilers is growing every day.

Profile your own amplifiers
While the incredibly lifelike profiles included with the Profiler Rack will appeal to everybody, you’ll love the Profiler Rack if you have a ton of amps already. It’s easy to connect the Profiler Rack to the amp you want to profile, hook up a microphone, and capture the sound of that amp and store it as a preset. You’ll be amazed at how accurately your profiled amp preset responds to the gain and tone controls.

The perfect link between stage and studio
Ever been frustrated trying to re-created the tone you captured on a recording when you play out live? You’ll love the Profiler Rack, because it can profile your studio sound while you’re recording. Just take a split of the mic you’re recording with and use the split signal to connect to the Profiler Rack. You’ll capture the sound of your studio performance, ready to be recalled on any stage in the world at a moment’s notice.

Kemper Profiler Rack Features:
Rackmountable guitar preamplifier can create profiles of any physical guitar amplifier
Includes 200 amplifier profiles for you to start with
Easy to profile your own amplifiers: all you need is a microphone and cable, guitar cables, and a combo amp or amp head and cabinet
Built-in DI can split your signal to a direct output, for simultaneous recording of your dry guitar signal and the guitar amp profile
Great sounding collection of effects in addition to the amplifiers
Automatic spillover lets your delay and reverb tails fade out naturally when you change presets
You can lock individual module settings when changing presets, for example keeping your current delay effects settings while changing amp profiles
Effects loop lets you integrate your hardware effects and stompboxes

Technical Specifications

Height: 21.7 cm (8.54 inches)
Width: 37.8 cm (14.88 inches)
Depth: 17.3 cm (6.81 inches)

Height: 13.9 cm (5.47 inches),
3 HE (3 RU)
Width: 48.3 cm (19 inches)
Depth: 22 cm (8.66 inches)

5.32 kg (11.73 pounds)
5.00 kg (11.02 pounds)
6.50 kg (14.33 pounds)
6.18 kg (13.62 pounds)

Power Amp
PowerHead and PowerRack:
600 Watts at 8 Ohm
300 Watts at 16 Ohm

Digital Inputs and Outputs
S/PDIF In/Out 44.1 kHz (24 bit)
with RCA Phone connectors
(Master only)

Analog Inputs
Front Input:
¼ inch TS unbalanced, dynamic range >108dB, impedance 1 MegOhm
Alternative Input:
¼ inch TRS balanced with ground lift, dynamic range =105dB
XLR balanced, ¼ inch balanced with ground lift, dynamic range =105dB

Analog Outputs
Master L and R Outputs:
XLR balanced, ¼ inch TS unbalanced with ground lift max. output level: XLR +22dBu, TS +16dBu
Monitor Output:
¼ inch TS unbalanced with ground lift max. output level: +16dBu
Direct Output/Send:
¼ inch TS unbalanced with ground lift max. output level: +16dBu
Output Dynamic Range:
>108 dB
Dedicated Headphone Output:
¼ inch TRS stereo, 33Ohm

Control and Data Interfaces
5-pin DIN commectors for In/Out/Thru
Two 1/4 inch TRS, each for
mono/stereo switch or expression pedal
(10kOhm min, 100kOhm max. impedance)
RL45 connector
USB 2.0 (FS) compatible device,
USB-A and USB-B connectors

Electrical Requirements
Line Voltage:
Head/Rack 100-240V. AC, max. 0.5. A
PowerHead/PowerRack 100-125 or 190-245V. AC, max. 10. A
50Hz to 60Hz, single phase

Environmental Requirements
Operating Temerature:
10° to 35° C (50° to 95° F)
Non-operating Temperature:
-20° to 47° C (-4° to 116° F)
Relative Humidity:
5% to 95% non-condensing
Maximum Altitudet:
3000 m (10,000 feet)

Electrical Approvals
FCC Verification procedure – 47CFR §15.101
Other Class B digital devices and peripherals
EN 55022 Class B: 2006+A1:2007
EN 61000-3-2: 2006 + A1:2009 + A2:2009
EN 61000-3-3: 2008EN55024:1998 + A1:2001
+ A2:2003
EN 55024: 1998 + A1:2001 + A2:2003, 2010

Contact Us

Payment & Security

Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details or have access to your credit card information.

You may also like

Recently viewed